DIY Build Guides

●Work in Progress

Step-by-step guides for assembling Hyphi hardware. Hyphi boards come pre-assembled — these guides cover wiring your LEDs, connecting power, and getting everything running.

Before You Start

These guides assume basic electronics comfort — if you've soldered wires or connectors before, you're set. If not, read Soldering Tips first.

Pre-assembled boards

Hyphi PCBs ship with all surface-mount components already soldered. Your job is wiring: LEDs, battery, connectors, and enclosure.

Guides

Guide	Difficulty	Time
Tools & Materials	—	—
Build: GlowFlora Clip	⚡⚡ Intermediate	~1h
Build: GlowFlora Home	⚡⚡ Intermediate	~2h
LED Wiring Basics	⚡ Beginner	Reference
Soldering Tips	⚡ Beginner	Reference

What You'll Need

• Soldering iron with fine tip (temperature-controlled)
• Solder — 63/37 or 60/40, 0.5mm diameter
• Flux pen
• Tweezers (ESD-safe)
• Multimeter
• USB-C cable (data-capable)

See the full Tools & Materials list.