Firmware Overview
Hyphi devices use different firmware depending on the product line.
| Product Line | Firmware | Controlled By |
|---|---|---|
| Home (GlowFlora Home, Clip) | WLED | WLED app / web UI |
| Wearable & Flow | Custom BLE firmware | Hyphi Hub PWA |
WLED — Home Devices
WLED is open source LED effects firmware for ESP32. Hyphi home devices ship with WLED pre-flashed.
- WLED Setup → — First flash and network config
- WLED Custom Config → — LED count, current limit, presets
- Flashing Guide → — esptool, Arduino IDE, web flasher
- OTA Updates → — Over-the-air firmware updates
BLE Devices — Wearable & Flow
Wearable and flow-line devices run custom BLE firmware implementing the OWLS protocol. They connect directly to the Hyphi Hub PWA over Bluetooth — no Wi-Fi or cloud required.
- BLE Device Firmware → — Build, flash, and service status